Barka Stainless Steel Marine Sink – Mirror Polished is a hemispherical basin for a boat galley or wash area. Model LISS30/SD combines a rounded bowl, a mirror-polished surface, and an inset flange for installation into a worktop. Its overall diameter is 33.5 cm, with a 30 cm bowl diameter and a depth of 15 cm. These measurements are useful when planning the available counter space and checking clearance below it. The round shape offers a practical washing area without the corners of a rectangular sink.

Made from 18/10 stainless steel with a 0.8 mm material thickness, this marine sink is intended for regular use around water. The mirror finish gives the bowl and rim a bright, reflective appearance and supports the corrosion resistance described for the product. It is a suitable choice when the sink will remain visible in a finished galley or cabin. As with any polished surface, routine cleaning helps maintain its appearance. The basin weighs approximately 0.78 kg.

The inset flange forms the edge that sits at the worktop opening. Below it, the hemispherical bowl provides space for everyday tasks such as rinsing cups, washing small items, and cleaning hands. The drain hole is positioned at the centre and lowered to help water leave the bowl. Barka’s drawing shows a 56 mm drain opening with a 74 mm surrounding drain section. These are basin dimensions; they should not be treated as a confirmed match for a drain fitting without checking the fitting’s own measurements.

This stainless steel sink can be considered for a new installation or a replacement where the worktop and plumbing can accommodate its dimensions. The 33.5 cm overall diameter includes the rim, while the 30 cm measurement describes the bowl; checking both helps avoid confusion when comparing sinks or planning a cutout. Also allow for the 15 cm bowl depth and the space required for plumbing beneath it. Drain fittings are not included, so they must be selected separately. Before ordering a waste fitting or making a worktop cutout, confirm the dimensions against the actual installation.

Key Features:

• Barka Stainless Steel Marine Sink – Mirror Polished uses a hemispherical bowl and inset flange to create a practical washing point in a boat galley or wash area.
• Its 18/10 stainless steel construction has a specified thickness of 0.8 mm.
• The mirror-polished finish gives the stainless sink a reflective appearance.
• The overall diameter is 33.5 cm; the bowl diameter is 30 cm, and the depth is 15 cm.
• The central, lowered drain hole helps water flow out of the basin.
• The basin weighs approximately 0.78 kg.
• Drain fittings are sold separately.

Applications / Suitable For:

• Barka Stainless Steel Marine Sink – Mirror Polished is suitable for a boat or yacht galley where a round, inset marine sink fits the available worktop.
• It can serve as a washing basin in a cabin or other onboard area with suitable counter space and drainage.
• It is an option for replacing an existing galley sink when the rim, bowl depth, drain position and plumbing can be accommodated.
• Its polished surface suits installations where the sink is a visible part of the worktop.

FAQs:

Q: What are the dimensions of the Barka Stainless Steel Marine Sink – Mirror Polished?
A: It measures 33.5 cm across the overall rim, with a 30 cm bowl diameter and a 15 cm depth.

Q: Is the sink made from stainless steel?
A: Yes. It is made from 18/10 stainless steel with a specified thickness of 0.8 mm.

Q: Does the Barka Stainless Steel Marine Sink – Mirror Polished include a drain fitting?
A: No. Drain fittings are not included and must be selected separately.

Q: Where is the drain hole positioned?
A: The drain hole is at the centre of the hemispherical bowl.