CANSB 180° Boat Access Hatch – 440mm x 315mm is a rectangular marine access hatch designed to provide convenient entry to storage spaces, service areas, inspection points, and concealed compartments on boats. It can be installed where regular access is required without leaving the internal space permanently exposed. The practical 180-degree opening allows the hatch cover to fold fully back, providing a clear opening when retrieving equipment, inspecting components, or carrying out routine maintenance.

Manufactured from ASA anti-UV ABS, this plastic boat hatch is intended for marine environments where equipment may be exposed to sunlight and changing weather conditions. ASA combines a clean appearance with suitability for exterior applications, making the hatch useful for installation on suitable boat surfaces. Its white finish blends naturally with many common deck, cockpit, cabin, and interior colour schemes.

The hatch has an overall opening size of 315mm x 440mm and requires a 231mm x 356mm cut-out. These measurements are important when replacing an existing boat access panel or preparing a new installation. Buyers should check the available mounting surface, internal clearance, and cut-out dimensions before ordering. The surrounding mounting flange includes fixing points for installation, while the rectangular shape makes it suitable for organised access to compartments where a round inspection port may not provide enough room.

A key part of the design is the removable-hinge “2 in 1” hatch cover. The cover can operate as a conventional hinged deck hatch cover for routine opening and closing, while the removable arrangement allows it to be detached when a completely unobstructed access area is needed. This can make it easier to load or remove equipment, reach components, clean the compartment, or perform maintenance without the open cover getting in the way.

This marine access hatch is suitable for creating access to general storage lockers, under-seat spaces, cockpit compartments, service cavities, and selected floor or deck areas. It may also be used as a marine inspection hatch where technicians or boat owners need to reach equipment installed behind a panel. The two recessed handles provide convenient operating points while maintaining a tidy external profile. The final installation location and method should always be selected according to the boat structure, panel thickness, required access, and the installer’s assessment.

Key Features:

• The CANSB 180° Boat Access Hatch – 440mm x 315mm provides a practical rectangular opening for accessing boat storage, inspection areas, and concealed service compartments.
• Opens through 180 degrees so the hatch cover can fold back and provide better clearance around the access opening.
• Made from ASA anti-UV ABS for use as a marine access panel in areas exposed to sunlight and normal marine conditions.
• Features a removable-hinge “2 in 1” cover that can remain attached for everyday operation or be removed when unrestricted access is required.
• Provides a hatch opening size of 315mm x 440mm, offering more usable access than a small round inspection port.
• Requires a 231mm x 356mm cut-out, helping installers confirm panel compatibility before preparing the mounting area.
• Rectangular design makes it suitable for storage compartments, equipment spaces, and inspection points with limited or specifically shaped installation areas.
• White colour complements many boat decks, cockpits, cabins, seating bases, and interior panels.
• Recessed operating handles help users open and close the boat hatch without adding large projecting hardware.
• Suitable for new marine installations as well as replacement projects where the specified dimensions match the available opening and mounting surface.

Applications / Suitable For:

• The CANSB 180° Boat Access Hatch – 440mm x 315mm is suitable for creating convenient access to storage lockers and general-purpose compartments on motorboats, sailboats, fishing boats, and other marine craft.
• Boat floor access panels where a rectangular opening is needed for inspection, cleaning, or reaching equipment beneath the installed surface.
• Cockpit and deck storage areas used for keeping ropes, fenders, tools, cleaning supplies, and other boating accessories.
• Under-seat compartments, side panels, cabin partitions, consoles, and other suitable flat mounting locations.
• Marine inspection hatch applications that require periodic access to pumps, hoses, wiring, plumbing connections, or other installed systems, subject to the compartment layout.
• Replacing an existing deck hatch cover when both the cut-out size and surrounding mounting space are compatible.
• Boatbuilding, refurbishment, maintenance, and storage-compartment projects requiring a white rectangular plastic boat hatch.

FAQs:

Q: What are the opening and cut-out dimensions of this hatch?
A: The hatch opening size is 315mm x 440mm, and the required cut-out dimension is 231mm x 356mm.

Q: What material is the CANSB boat hatch made from?
A: It is manufactured from ASA anti-UV ABS, a plastic material selected for exterior and marine-related applications.

Q: Can the hatch cover be removed?
A: Yes. It has a removable hinge “2 in 1” design, allowing the cover to remain hinged or be detached when clearer access is required.

Q: Where can this marine access hatch be installed?
A: It may be used on suitable boat decks, floors, cockpits, seating bases, cabin panels, storage lockers, and inspection compartments. Confirm the cut-out, mounting surface, and internal clearance before installation.