Heavy Duty Trailer Hitch Ball – 2″ Ball, 3,500 lbs Capacity is a chrome-plated towing component designed to create the connection point between a trailer coupler and a suitable vehicle-mounted ball mount. Its 50.8 mm ball diameter corresponds to the commonly used 2-inch trailer ball size, making it suitable for compatible 2-inch trailer couplers. The product can be used when towing boat trailers, utility trailers and other compatible light-duty trailer systems within the stated capacity.

Manufactured from medium carbon steel, this trailer hitch ball provides a solid metal connection for regular towing applications. The chrome-plated finish creates a smooth, clean exterior surface and gives the tow ball its polished appearance. Its rounded ball head allows a correctly matched trailer coupler to pivot as the towing vehicle turns or travels over changes in road level. This movement is essential for maintaining an articulated connection between the vehicle and trailer.

The supplied dimensions are 50.8 mm × 19 mm × 38 mm. These measurements identify a 50.8 mm ball head, a 19 mm mounting shank diameter and a 38 mm shank length. Before installation, buyers should compare all three dimensions with the trailer coupler, ball mount plate and mounting-hole size. The 19 mm threaded shank passes through the compatible mounting point and is secured using the supplied fastening hardware shown with the product. Correct dimensional matching helps ensure that the trailer ball fits the intended towing setup.

With a stated maximum capacity of 3,500 lbs, this 2 inch trailer ball is intended for towing arrangements that remain within that limit. The capacity of a towing system is not determined by the ball hitch alone. The trailer coupler, ball mount, receiver, vehicle, mounting hardware and other connected components must also be correctly rated. The usable limit of the complete setup should always be based on its lowest-rated component.

For marine use, this heavy duty ball hitch can form part of a boat trailer towing arrangement used to move compatible boats between storage areas, workshops, marinas and launching locations. It may also be used with compatible general-purpose trailers where the coupler size, mounting dimensions and load requirements match. Buyers replacing an existing tow ball should check the markings or measurements of the original component rather than selecting by appearance alone.

The straightforward bolt-on design makes this trailer hitch ball suitable for installation on a compatible ball mount with the correct hole diameter and plate configuration. Before every towing operation, the connection should be checked to confirm that the coupler is fully seated and properly secured. The nut and mounting area should also be inspected according to the towing equipment or vehicle manufacturer’s instructions. Selecting the correct trailer ball size is important because a coupler designed for a different ball diameter must not be used with this product.

Key Features:

• Heavy Duty Trailer Hitch Ball – 2″ Ball, 3,500 lbs Capacity provides a 2-inch connection point for a correctly matched trailer coupler and towing assembly.
• The stated maximum load capacity is 3,500 lbs when the product is installed and used as part of a suitably rated towing system.
• Its 50.8 mm ball head matches the nominal diameter of a 2 inch trailer ball.
• The supplied dimensional specification is 50.8 mm × 19 mm × 38 mm, covering the ball diameter, mounting shank diameter and shank length.
• Medium carbon steel construction provides a solid body for compatible towing applications.
• The chrome-plated exterior creates a smooth, polished finish suitable for a visible towing component.
• The threaded mounting shank supports bolt-on fitting to a compatible ball mount with the correct mounting-hole size.
• Its rounded tow ball profile allows a properly matched coupler to articulate while the vehicle and trailer are turning or travelling over changing road surfaces.
• The separate nut and washer arrangement shown with the product supports secure mounting when installed according to the relevant equipment instructions.

Applications / Suitable For:

• Heavy Duty Trailer Hitch Ball – 2″ Ball, 3,500 lbs Capacity is suitable for compatible boat trailers fitted with a coupler designed for a 50.8 mm or 2-inch tow ball.
• Boat transport between storage facilities, marine workshops, marinas and suitable launching areas.
• Compatible utility trailers and other towing applications that do not exceed the stated 3,500 lbs capacity.
• Replacement of an existing trailer ball when the ball diameter, 19 mm shank diameter, 38 mm shank length and load rating all match.
• Ball mounts that have the appropriate mounting-hole diameter, plate dimensions and rated towing capacity.
• Towing systems in which the vehicle, receiver, ball mount, trailer coupler and all related hardware are rated for the intended load.

FAQs:

Q: What size coupler fits the Heavy Duty Trailer Hitch Ball – 2″ Ball, 3,500 lbs Capacity?
A: It is intended for a compatible coupler designed for a 50.8 mm or nominal 2-inch trailer ball. Always verify the coupler’s marked ball size before use.

Q: What do the 50.8 mm × 19 mm × 38 mm dimensions mean?
A: They indicate a 50.8 mm ball diameter, a 19 mm mounting shank diameter and a 38 mm shank length.

Q: Can this trailer ball be used with a boat trailer?
A: Yes, it can be used with a compatible boat trailer when the coupler size, mounting arrangement and complete towing-system ratings are suitable.

Q: Does the 3,500 lbs rating apply to the entire towing setup?
A: No. It is the stated capacity of the trailer ball. The complete system must follow the capacity of its lowest-rated component.